Home | About Us | Contact Us | Sitemap | News
1-800-225-7373
 
 
Right ShimDrawing ToolCapabilitiesQualityTechnical InformationCareersFrequently Asked QuestionsRequest a QuoteLeft Shim
Spacer
Spacer
 
   You are here: Home / Technical Information
Spacer
Top of Box
Right Pointer Technical Information
Spacer
This section contains technical information, engineering formulas, data, and other useful information regarding perforated metals. This information is the generally accepted industry standard that can be used as a guideline. Hendrick Manufacturing routinely exceeds these specifications.
Spacer
 
Right Pointer Table of Contents
Spacer
   Big BulletLength & Width Tolerances
       Big BulletCarbon Steel
       Big BulletStainless Steel
       Big BulletAluminum
       Big BulletResquared Tolerances L & W
   Big BulletSquareness Tolerances
   Big BulletTolerances on Openings
   Big BulletTolerances on Bars
   Big BulletFlatness Tolerances
   Big BulletCamber Tolerances
   Big BulletHole Patterns
   Big BulletMargins
   Big BulletBlank Areas
   Big BulletVibrating Screens
   Big BulletReasons for calling us first!
Spacer
 
Right Pointer Technical Studies
 
Right Pointer Can't find what you are looking for?
Spacer
Bottom of Box
 
Hendrick Manufacturing Company 1 Seventh Avenue Carbondale, PA 18407-2251 email: sales@hendrickmfg.com
 


  © 2008 Hendrick Manufacturing, all rights reserved.